| 1. The empurradores of driving oil of valves pure and to insert them in the cylinder block. Glance that was established at ancient places. |
| 2. To check that the inter-connected surfaces of the cylinder block and leaders of the cylinder block have to purely. |
| 3. To install the leaders' new placing of the cylinder block in the direction covers in the cylinder block. To look at the correct agreement of the placing. One of other differentiates the left and right placing. Putting there is an inscription "the FRONT of" TORAHS ("the advanced superior party"). |
| 4. To lower carefully leaders of the cylinder block in the cylinder block and to register pins. |
| 5. In three steps, in certain sequence to hold tight pins according to the moments of inhalation when 3.3.1 specified in the subsection. |
| 6. To bars of oil of the motor of empurradores and to insert them in the cylinder block. |
| 7. To establish maslootrazhatelny guards in leaders of the cylinder block and to establish axes of yokes valvate joined. |
|
8. To insert screws of agreement of levers of valves in bars nests of empurradores. |
| 9. To hold tight gradually pins of fixation of axes of yokes valvate up to the corresponding moment of an inhalation. |
| 10. To polish the exterior edge of a surface of leaders' contact of the cylinder block and a surface of contact of a collector of entry with the selante to put the installation. |
| 11. To establish at the place the new placing of a collector of entry and to establish a collector of entry. |
| 12. To establish pins of fixation of a collector of entry and to hold tight them in four receptions up to the necessary moment of an inhalation in certain sequence. |
| 13. To adjust slits valvate. |
