Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+ 6. Union
- 7. Transmissions
-7.1. Mechanical transmission of five speeds of type of N
7.1.1. Technical characteristic
+7.1.2. Service and repair
+7.2. Mechanical MT 75 transmission
+7.3. Transmission A4LD automatic
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment
|
The transmission has three end, a classic drawing, four transfers synchronized ahead and not synchronized transfer of a support. The wheel of gear of the main end and a wheel of gear of the driven end are in the continuous gear with wheels of gear of an intermediary end. The dislocation of gear is done by the connection of the wheel of corresponding gear with the driven end. The lever of the dislocation of gear is in a floor. The reverse gear is lit by the connection of a wheel of gear of a support with two gear wheels pryamozuby of the driven and intermediary end.
Tipo:N.
Data agreement
| Distance between a wheel of gear of the walk of a speedometer and a ring of lock of the sincronizador of the 5th transfer |
|
| Thickness of rings of lock of a nave of the sincronizador of transfers 3-4 in secondary to an end |
1,63; 1,74; 1,85 mm
|
| Thickness of rings of lock of the load of a secondary end in an intermediary case, and also a ring of lock of the sincronizador of the 5th transfer in secondary to an end |
1,75; 1,81; 1,87; 1,93; 1,99 mm
|
| Thickness of rings of lock of the load of an intermediary end in an intermediary case |
1,88; 1,95; 2,12; 2,19; 2,26 mm
|
Numbers of transfer of the transmission with motors dm3 1,8, 2,0 and V6 2,4
|
Transfer
|
Number of transfer of transfer
|
Full number of transfer
|
|
In number of transfer of the main transfer
|
|
3,64
|
3,62
|
3,92
|
|
1
|
3,65
|
13,286
|
13,213
|
14,308
|
|
2
|
1,97
|
7,171
|
7,131
|
7,722
|
|
3
|
1,37
|
4,987
|
4,959
|
5,370
|
|
4
|
1,00
|
3,640
|
3,620
|
3,920
|
|
5
|
0,82
|
2,985
|
2,896
|
3,214
|
|
Support
|
3,66
|
13,324
|
13,249
|
14,347
|
Numbers of transfer of the transmission with motors V6 2,8 and 2,9 dm3
|
Transfer
|
Number of transfer of transfer
|
|
1
|
3,360
|
|
2
|
1,810
|
|
3
|
1,260
|
|
4
|
1,000
|
|
5
|
0,825
|
|
Support
|
3,365
|
Lubricant
| Amount of oil |
1,25 dm3
|
| To type |
oil of the transmission SAE 80 Ford SQM 2 C 9008 A or oil of Ford's gear box ESD M2C 175th semisynthetic
|
Moments pressure
| Case of union to the cylinder block of the motor |
40 - 51 nanômetros
|
| Case of union to an advanced part of a case of the transmission |
70 - 90 nanômetros
|
| The driving axle to a secondary end of the transmission |
57 - 67 nanômetros
|
| Metal Conector and of rubber to a case of transmission |
50 - 57 nanômetros
|
| Crossbeam of support of the triangular form of interruption of transmission to a body |
20 - 25 nanômetros
|
| Part subsequent to an advanced part of a case of the transmission |
45 - 49 nanômetros
|
| Covering to an advanced part of a case of the transmission |
9 - 11 nanômetros
|
| The capture of direction of the load of launch of union |
9 - 11 nanômetros
|
| Nut of fixation of a wheel of gear of the 5th transfer in intermediary to an end |
120 - 150 nanômetros
|
| Basic plate of a wheel of gear of the 5th transfer |
21 - 26 nanômetros
|
| Switch of fires of a support |
1 - 2 nanômetros
|
| Cork of stuffing of oil |
23 - 27 nanômetros
|
|
|
