FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car


Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+ 6. Union
- 7. Transmissions
   +7.1. Mechanical transmission of five speeds of type of N
   -7.2. Mechanical MT 75 transmission
      7.2.1. Technical characteristic
      +7.2.2. Service and repair
   +7.3. Transmission A4LD automatic
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


7.2. Mechanical MT 75 transmission

7.2.1. Technical characteristic
GENERAL INFORMATION

The transmission is of three grosses, a classic drawing, it has five synchronized transfers of the advancement (the 4th transfer – a straight line) and synchronized transfer of a support. The box is installed along an axle of the car behind the motor. The lever of the dislocation of gear is installed in a floor of the car. It is established in cars from October of 1988.

The main distinctions in comparison with the type transmission of N

The very moment in an entry
300 nanômetros
Method of consolidation of the airplanes of a case
through the special briefcase that pressuriza

The gear wheels are established in needle loads.

The reverse gear is synchronized.

The internal guide of the lever of the dislocation of gear has the protection against the chance inclusion of the transfer of a support.

Numbers of transfer

CARS WITH NRA AND MOTORS N9B

Transfer
Number of transfer of transfer
Number of transfer of the main transfer
Full number of transfer
1
3,89
3,92
15,248
2
2,08
8,153
3
1,34
5,252
4
1,00
3,920
5
0,82
3,214
Support
3,51
13,759

CARS WITH MOTORS N8B
Transfer
Number of transfer of transfer
Number of transfer of the main transfer
Full number of transfer
1
3,89
3,14
12,21
2
2,08
6,53
3
1,34
4,20
4
1,00
3,14
5
0,82
2,57
Support
3,51
11,02

Lubricant

Amount of oil
1,20 dm3
To type
oil of Ford's transmissions ESD M2C 186 To
Service frequency
level check each one 20.000 km or once in a year; the periodic oil substitution is not supplied

Moments pressure

Case of the block of wheels of gear to a case of union
20 - 27 nanômetros
Case of union to the cylinder block of the motor
29 - 41 nanômetros
Fixation of the capture of direction of the load of launch of union
15 - 17 nanômetros
Bearer of the load of an intermediary end:
  – 1 stage
15 - 20 nanômetros
  – 2nd stage
to be weakened in 60 °
Fixation of a nut of the load
9 - 11 nanômetros
Fixation of an axle of transfer of a support to a case
8 - 11 nanômetros
Pin of a cork of transfer of a support to a case of transmission
18 - 25 nanômetros
Nut of an intermediary end
200 nanômetros
Cork of selector's cork
20 - 27 nanômetros
Cork of an opening of stuffing and unloading of oil
23 - 32 nanômetros
Fixation of a ring of lock of the load of ball of a secondary end
20 - 27 nanômetros
Switch of lamps of a support
10 - 14 nanômetros