|
FORD'S SCORPIO1985-1994 of launchRepair and operation of the car |
|
Ford Skorpio +1.1. Identification of the car +2. Maintenance +3. Motors +4. System cooling +5. Fuel system + 6. Union - 7. Transmissions +7.1. Mechanical transmission of five speeds of type of N +7.2. Mechanical MT 75 transmission -7.3. Transmission A4LD automatic 7.3.1. Technical characteristic +7.3.2. Service and repair +8. Driving axle and rear bridge +9. Direction +10. Supports of the triangular form of interruption +11. Brakes system +12. Wheels and tires +13. Body +14. Electric equipment |
7.3. Transmission A4LD automatic7.3.1. Technical characteristic
The transmission A4LD automatic has four transfers of the advancement and transfer of a support. During the advancement the lever of the dislocation of gear can maintain four positions: "D", "3", "2" and "1". In models of the first launch of the situation "D" and "3" also "D" if they indicated how "OF". Besides, this lever can maintain more three additional, appropriate position: "P", "R" and "N". the 4th transfer is nadperedachy (it has the speed of increase of number of transfer). The launch of the motor is possible only during the installation of the lever of the dislocation of gear in the provisions "P" or "N". The security operation does the impossible launch of the motor if the lever of the dislocation of gear is in another situation. The provisions are indicated on the lever of the dislocation of gear located in a floor of the car. In the situation "D" dislocation of gear happens automatically in all the variety. The automatic choice of the transfer depends on the speed of the movement, nevertheless there is a possibility of the commutation of the transfer for the driver in more lowest pressing of a pedal of a gas pedal against the stop (I lower kick) in the provision of the very opening of a valve of butterfly of the carburator. To brake for the motor is done in the provisions "1" or "2". PARAMETERS OF CONTROL
Speed of control of the motor: 2000-2900 revolutions per minute. The speeds of the movement in whose moment there is a dislocation of gear
GEOMETRICAL PARAMETERS
Numbers of transfer
The motor dm3 2,0 – a transmission of hydrokinetic Trilock with the union of blockade and transfer number 2,35. The motor dm3 2,8 – a transmission of hydrokinetic Trilock with the union of blockade and transfer number 2,15. Lubricant
Moments pressure
|
|