FORD'S SCORPIO
1985-1994 of launch
Repair and operation of the car
Ford Skorpio
+1.1. Identification of the car
+
2. Maintenance
-
3. Motors
+3.1. Motor of OHC
+3.2. Motor of DOHC
-3.3. Motor of V6
3.3.1. Technical characteristic
3.3.2. The repair that does not demand the removal of the motor
3.3.3. Removal of the motor
-3.3.4.
To be demolished and check of details of the motor
3.3.4.1. Desmontagem of the motor
3.3.4.2. Check of degree of use of details of the motor
3.3.4.3. Knot of an axle of yokes
3.3.4.4. Empurradores of valves and bar of empurradores
3.3.4.5. Axle
3.3.4.6. Leaders of the cylinder block
3.3.4.7. Cylinders
3.3.4.8. Check and restoration of pistons and rings of piston
3.3.4.9. Fingers of piston and sticks
3.3.4.10. Inclination end
3.3.4.11. Radical loads and conrod
3.3.4.12. Distributive gear wheels
3.3.4.13. Pendulum
+3.3.4.14. Lubrication system
3.3.4.15. System of ventilation of a case
+3.3.4.16. Meeting of the motor
3.3.4.17. Agreement of slits of valves
3.3.4.18. Auxiliary details of the motor
3.3.4.19. Installation of the motor
3.3.4.20. Launch of the motor after repairs of capital or restoration
+3.3.5.
Modifications in a drawing of motors V6 2,4 and 2,9 dm3
+3.4.
Systems of ignition and management of motor
+3.5. Diesel engines
+4.
System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment
3.3.4.4. Empurradores of valves and bar of empurradores
ORDER OF REALIZATION
1. To check empurradores of valves of the existence of use or damage and, in case of the necessity, to substitute them new.
2. To check bars of empurradores of the existence of a curvature or use. If necessary it will align or substitute.
