| 1. To examine radical necks and conrod in the existence of traces of use, рисок or scratches. To check them ovality, using a micrometer. The ovality must consider himself 0,025 excessive mm how excessively. |
| 2. Before the repeated installation the inclination end has to be compensated carefully, including internal oil channels. It can be done through a wire or a compressed air of purge. Then to insert a butter dish in the relevant oil channels and the oil insists out on them. It will appear of the next opening. Any obstruction of the channel of oil has to be removed before the installation of an end of inclination. |
| 3. To check the load of a main end and, if necessarily, to substitute it (in models with the manual transmission). |
|
