FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   +3.2. Motor of DOHC
   -3.3. Motor of V6
      3.3.1. Technical characteristic
      3.3.2. The repair that does not demand the removal of the motor
      3.3.3. Removal of the motor
      -3.3.4. To be demolished and check of details of the motor
         3.3.4.1. Desmontagem of the motor
         3.3.4.2. Check of degree of use of details of the motor
         3.3.4.3. Knot of an axle of yokes
         3.3.4.4. Empurradores of valves and bar of empurradores
         3.3.4.5. Axle
         3.3.4.6. Leaders of the cylinder block
         3.3.4.7. Cylinders
         3.3.4.8. Check and restoration of pistons and rings of piston
         3.3.4.9. Fingers of piston and sticks
         3.3.4.10. Inclination end
         3.3.4.11. Radical loads and conrod
         3.3.4.12. Distributive gear wheels
         3.3.4.13. Pendulum
         -3.3.4.14. Lubrication system
            3.3.4.14.1. Oil bomb
         3.3.4.15. System of ventilation of a case
         +3.3.4.16. Meeting of the motor
         3.3.4.17. Agreement of slits of valves
         3.3.4.18. Auxiliary details of the motor
         3.3.4.19. Installation of the motor
         3.3.4.20. Launch of the motor after repairs of capital or restoration
      +3.3.5. Modifications in a drawing of motors V6 2,4 and 2,9 dm3
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.3.4.14. Lubrication system

GENERAL INFORMATION

System of lubrication of motor

The trundle bed of manufactured oil from the installed beaten steel of below of a case serves of the tank of the oil of motor. Through the oil of bomb of oil of the trundle bed he was seeing the filter of net and a reception branch a tube goes to a filter of oil of complete line.

The filtered oil goes a current of the center of the element of filtration and road the small channel in the right side comes to the sensor of the pressure of oil and the main trunk (in the left side of a case) he was seeing the angry channel.

Four channels bring the main trunk to four radical loads, the loads of axle, to his time, also they are informed with radical loads. In loads conrod the oil moves road diagonal channels of the very near radical loads of an end of inclination.

In the moment of the rotation of an end of inclination an oil brings near through openings the loads of the lowest leaders of sticks, lubricant in spite of sprinkling of fingers of piston and the parties of the cylinders that realize what the side pressure through that supplies with itself. The distributive gear wheels also are polished in spite of the fact that lubricating channels sprinkle road.

Of a neck of the third load of an oil of end of inclination in the way that hesitates below the pressure it reaches the channel in the cylinder block and a head of the cylinder block to yokes axes valvate. Then the oil returns to the motor trundle bed in great channels in the cylinder block and a head of the cylinder block.