FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

The system of the ignition is destined for the ignition of the mixture of work in motor cylinders by the category of spark that has to be created in strictly certain moment.

The system of the ignition of ESC II is installed in motors with the carburator and includes the roll of ignition, the ignition distributor with the built sensor of the speed of the motor, one unity of electronic control, when they were taken of spark and sensors of the temperature of cooling the liquid, the depression and the neutral position of the lever of the selector of the automatic exchange.

The system of the ignition of ESC IV is installed in motors with the system of the injection of the fuel and includes the roll of ignition, the ignition distributor with the built sensor of the speed of the motor, the electronic module (controlador), been overcome with spark and sensors of the temperature of cooling the liquid, neutral position of the lever of the selector of the automatic exchange, the provision of a valve of butterfly and absolute pressure.

^{The motor V6-24 with a volume of work of 2,9 dm3 is equipped of the system of the ignition without ignition distributor.}

Security rules

To avoid what the electric defeat current prohibits in order that wires of high voltage touch the work motor.

There prohibits to adhere strictly a lamp of control or the condenser to the capture of 1 roll of the ignition.

To do all the connections of devices of measurement only in the ignition off.

Checking a compression to withdraw the central wire of the distributor of the ignition and to join it to the additional candle fixed by the case in the weight.

To decipher the transport the electrowelding works in the ignition off and the accumulator off.