FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   -3.5. Diesel engines
      3.5.1. Technical characteristic
      3.5.2. The repair that does not demand the removal of the motor
      3.5.3. Check and adjust of valves slits
      -3.5.4. Fuel system
         3.5.4.1. Mouths
         3.5.4.2. Taken of incandescence
         3.5.4.3. Check of a compression
         3.5.4.4. Removal of air of system of fuel
         3.5.4.5. Removal and installation of the bomb of fuel
         3.5.4.6. Check and adjust of turns of wasting time
         3.5.4.7. Increase thread in turns of wasting time
      +3.5.5. Head of the cylinder block
      3.5.6. Removal and installation of the motor
      +3.5.7. Desmontagem, repair and meeting of the motor
      3.5.8. Turbocompressor
      +3.5.9. Lubrication system
      +3.5.10. System cooling
      3.5.11. Bad functioning standard of the motor
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.5.4.4. Removal of air of system of fuel

GENERAL INFORMATION

This proceeding has to be executed certainly in the next cases:

  – make lose interest of the fuel oil pipeline;
  – zavozdushivaniye of an outline of fuel of the bomb of fuel;
  – extinguishment of the motor the fuel absence in the fuel tank;
  – substitutions of the filter of fuel.

Prevention

During the removal of air of the system of fuel it is necessary to let in the valve eletromagnética of a stop of the tension of motor to confide of the valve.

Fixation of the line of supply of fuel of return

ORDER OF REALIZATION

1. To check the availability of the fuel in the fuel tank.
2. To install below the fuel they filter the corresponding container to join the fuel it had been emptied.
	3. To unscrew the screw of the removal of air (1) in a hollow pin of a hose of production of the filter of fuel and to unscrew the doorknob of the bomb of bomb (2).
4. To do the extraction through bomb for the bomb up to road the screw of the removal of air there is no fuel without bottles of the air.
5. To hold tight the doorknob of the bomb and in this situation to crush the screw of the removal of air.
	6. To unscrew the pin of the removal of air (it is specified by an arrow) located for a side in the bomb of fuel of the high pressure or the fixation of the line of supply of fuel of return and to do the extraction through bomb for the bomb even for them there is no fuel without bottles of the air.
7. To stop the supply of fuel when the button of the bomb begins to show the strong resistance. In the equipped motors of the manual fuel they pump with a head of polygonal formed to shake hands a head of the bomb of fuel.
8. If they were substituted (or if they unscrewed), the injection oil pipelines, it is necessary to weaken nuts of his fixation to mouths, to hold tight a pedal of gas pedal against the stop and to include an author until of oil pipelines bass with the fixation weakened the fuel it begins going out.
9. To screw oil pipelines of the provision of the fuel in mouths and to begin the motor.
10. To check the tension of all the connections of oil pipelines of fuel.

FILTER OF FUEL

Substitution of the filter

Knot of the filter of fuel

1 - bearer of the filter,

2 - the element of substituted filter,

3 - colonist,

4 - bomb of manual fuel

The substituted element of the filter corsets itself between the bearer of the filter and his colonist.

Substitution of an element of the filter of fuel

With – a colonist,

Е – they drain the pin

ORDER OF REALIZATION

1. To unscrew a pin of the fixation of a colonist to a bearer of the filter.

2. Desconectar a colonist and the substituted element of the filter of fuel.

3. To establish the new element substituted in a colonist and to move even держателяю the filter.

4. To crush carefully a pin of the fixation of a colonist to a bearer of the filter.

5. To check the tension of connections of the filter of fuel.

Water removal of a colonist

ORDER OF REALIZATION

1. To substitute the capacity below the fuel filter, to weaken a pin of drain and a pin of the fixation of the oil pipeline of the removal of the fuel of the filter.

2. To hold tight both pins then the water stops following.