FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   -3.5. Diesel engines
      3.5.1. Technical characteristic
      3.5.2. The repair that does not demand the removal of the motor
      3.5.3. Check and adjust of valves slits
      +3.5.4. Fuel system
      +3.5.5. Head of the cylinder block
      3.5.6. Removal and installation of the motor
      +3.5.7. Desmontagem, repair and meeting of the motor
      3.5.8. Turbocompressor
      +3.5.9. Lubrication system
      -3.5.10. System cooling
         3.5.10.1. Unloading of liquid of the system of cooling
         3.5.10.2. Stuffing of system and removal of air
         3.5.10.3. Supporter
         3.5.10.4. Removal and installation of the union of the supporter
         3.5.10.5. Thermostat
      3.5.11. Bad functioning standard of the motor
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.5.10. System cooling

3.5.10.1. Unloading of liquid of the system of cooling

ORDER OF REALIZATION

1. To unscrew a cork of the stuffing of liquid in a wide tank. ·
2. To establish a lever of control of the temperature of the system of the heating of the hall in the very temperature.
	3. To unscrew a cork of the unloading of cooling the liquid in an electric heater (it is specified by an arrow), below which it is more advanced necessarily to substitute the corresponding capacity and to wait for the liquid that cools I lower still it will not flow.