FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   -3.5. Diesel engines
      3.5.1. Technical characteristic
      3.5.2. The repair that does not demand the removal of the motor
      3.5.3. Check and adjust of valves slits
      +3.5.4. Fuel system
      -3.5.5. Head of the cylinder block
         3.5.5.1. Removal of a head of the cylinder block
         3.5.5.2. Installation of a head of the cylinder block
         3.5.5.3. Check and repair of a head of the cylinder block
      3.5.6. Removal and installation of the motor
      +3.5.7. Desmontagem, repair and meeting of the motor
      3.5.8. Turbocompressor
      +3.5.9. Lubrication system
      +3.5.10. System cooling
      3.5.11. Bad functioning standard of the motor
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.5.5. Head of the cylinder block

3.5.5.1. Removal of a head of the cylinder block

GENERAL INFORMATION

Knot of a head of the cylinder block

1 - head of the cylinder block,
2 - placing of a head,
3 - camera of combustion of vortex,
4 - the fixation ball,
5 - nest of the final valve,
6 - nest of the valve of entry,
7 - valves guides,
8 - covering of a head of the cylinder block,
9 - placing of a covering of a head,

10 - cork of a mouth maslozalivny,
11 - production oil pipeline of cooling the liquid,
12 - the sensor of the temperature of cooling the liquid,
13 - thermostat of the automatic device of launch of the cold motor,
14 - case of thermostat

Prevention

In the moment of the removal of a head of the cylinder block the motor will be cold (it is necessary to wait 6 hours after putting out of the motor).

ORDER OF REALIZATION

1. Desconectar a wire of the weight of the accumulator and to withdraw the filter of air.

2. To withdraw a covering of leaf of below the motor, to fuse the liquid that cools (having substituted the corresponding capacity). Desconectar hoses of system of cooling: more low than an electric heater and top of the bomb.

3. Desconectar the oil pipeline of a wide tank of the system of cooling, of a head of the cylinder block, of a system of heating of the hall and the oil pipeline of vacuum of the bomb of vacuum.

4. Desconectar a wire and the current tire of candles of incandescence, and also other electric wires.

5. Desconectar a thread of the agreement of wasting time of a head of the cylinder block of the motor.

6. Desconectar the oil pipeline of the injection of the fuel and the oil pipelines of return of mouths, to unscrew mouths and incandescence covers of a head of the cylinder block.

7. To withdraw the bomb of vacuum together with a belt of side of driving and to remove the creator.

8. Desconectar a frame of the fixation of the creator of a collector of entry and a belt takes away the side.

9. Desconectar of a head of the cylinder block the oil pipeline of the provision of oil and a tube of advanced leak of a final collector.

10. To discover leaders of the cylinder block and an axle of levers of valves.

11. To take nucleuses of empurradores.

12. To unscrew pins of the fixation of a head of the cylinder block in the sequence, the sequence of return of his pressure (to see the rice. Sequence of pressure of pins of fixation of a head of the cylinder block).

13. To withdraw a head of the cylinder block together with collectors: entry and end. To withdraw the placing of a head.