FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Designation of thickness of placing of a head of the cylinder block

Sequence of pressure of pins of fixation of a head of the cylinder block

ORDER OF REALIZATION

1. To the carefully clear placing the prileganiye surfaces in the cylinder block and a head, and also openings of pins of the fixation of a head of the cylinder block. 2. To crush the agreement of alignment fastens 21.083. 3. To establish the new placing of a head of the cylinder block of the corresponding thickness, having checked the exactness of his placing. To establish carefully a head, to crush a few pins of the hands of the fixation and to substitute two pins ally with two pins of the fixation of a head of the cylinder block. 4. To the oil motor the nucleuses ends of empurradores and to arrange them so that they interacted with the same empurradores with which they worked before the removal of a head of the cylinder block. To establish the placing of the oil pipeline of the provision of oil and an axle of the lever of valves. To hold tight pins and bearers' nuts of an axle of the lever of valves. 5. To hold tight pins of the fixation of a head of the cylinder block, observing the sequence of corseting itself (to see the rice. The sequence of the pressure of pins of the fixation of a head of the cylinder block), the recommended moments and a method of corseting itself (to see the etiquette. Moments pressure). 6. To adjust a slit of valves. 7. To crush taken of incandescence. 8. To install the creator and to join electric wires. 9. To establish mouths and to join his oil pipelines. 10. To join hoses of the system of cooling and to fill the system of cooling.