FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   -3.5. Diesel engines
      3.5.1. Technical characteristic
      3.5.2. The repair that does not demand the removal of the motor
      3.5.3. Check and adjust of valves slits
      +3.5.4. Fuel system
      +3.5.5. Head of the cylinder block
      3.5.6. Removal and installation of the motor
      +3.5.7. Desmontagem, repair and meeting of the motor
      3.5.8. Turbocompressor
      +3.5.9. Lubrication system
      -3.5.10. System cooling
         3.5.10.1. Unloading of liquid of the system of cooling
         3.5.10.2. Stuffing of system and removal of air
         3.5.10.3. Supporter
         3.5.10.4. Removal and installation of the union of the supporter
         3.5.10.5. Thermostat
      3.5.11. Bad functioning standard of the motor
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.5.10.4. Removal and installation of the union of the supporter

GENERAL INFORMATION

Cooling of supporter's union

1 - contact with the brush,
2 - contact with the ring,
3 - belt driving,
4 - I roll,
5 - supporter's blades,
6 - pin and nut of fixation of blades of the supporter,
7 - central nut,

8 - axle,
9 - load,
10 - pin agreement,
11 - air slit,
12 - base,
13 - load,
14 - the mechanism of distribution of gas directs the covering

ORDER OF REALIZATION

1. To fuse the liquid that cools of the system.

2. Desconectar tubes of branch of an electric heater and to withdraw an electric heater.

3. To take away a belt of driving of the supporter.

4. To register a pulley of m to unscrew the central nut of an axle of the supporter.

5. The easy punches of the kiyanka to a pulley and the union to withdraw the union eletromagnética.

6. To discover the walk of mechanism of distribution of gas, to withdraw a spring ring of lock and to take a supporter's axle with loads.

7. The union in the sequence of the return to the removal settles down.

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE