| 1. To fuse the oil of motor of the motor and to take the rate of the level of oil. |
| 2. To unscrew a filter of oil. |
| 3. To unscrew pins of the fixation of the case of a plate of pressure of press to a pendulum and to withdraw it. |
| 4. To withdraw a pendulum. |
| 5. To take away a creator they direct the belt. |
| 6. To unscrew a lower long pin of the fixation of the creator, then the superior pin and to remove the creator. |
| 7. To unscrew the central pin of the fixation of the mechanism of a tension of a belt of driving and to withdraw the mechanism of tension. |
| 8. To discover a head of the cylinder block. |
| 9. To remove the distributor of ignition. |
| 10. To withdraw the superior covering of the mechanism that distributes the gas. |
| 11. 1 becomes an end of inclination in the direction of the rotation of work before the installation in the superior dead point in a step of the compression of the piston of the cylinder. |
| 12. To weaken a pin of the fixation of a pulley of an end of inclination. For an exception of a provorachivaniye of an end of inclination unscrewing a pulley it is necessary to register a pendulum of teeths of a gear garland. |
| 13. To unscrew partially a pin of fixation of a pulley of an end of inclination and use of an artist of streaptise, to withdraw a pulley. The captures of an artist of streaptise will rest against a metal part of a pulley. |
| 14. To unscrew the central pin of the fixation of the mechanism of a tension of a belt of driving and to withdraw the mechanism of tension. |
| 15. To unscrew 11 pins of the fixation and to withdraw the lowest covering of the mechanism that distributes the gas. To withdraw the consolidation of rubber. |
| 16. To unscrew a pin and to withdraw a natyazhitel of a chain of the walk of the bomb of oil. |
| 17. To unscrew a pin of the fixation of an asterisk in the oil bomb and to withdraw an asterisk together with a chain. |
| 18. To withdraw the top uspokoitel of a chain. |
| 19. To unscrew two pins of the fixation of the lowest uspokoitel of a chain and to take it. |
| 20. To withdraw a ring of lock of an axle of the lever of a natyazhitel of a chain of the mechanism that distributes the gas and to withdraw the lever of a natyazhitel. |
| 21. To withdraw an axle of the lever of a natyazhitel of a chain of the mechanism that distributes the gas, using a pin of M6x70 and the capture. |
| 22. To mark asterisks of axles and to withdraw them. |
| 23. To withdraw an asterisk and a segment spline of an inclination end. |
24. To take a chain of the mechanism that distributes the gas.
Prevention
 To avoid the impact of pistons and valves in the retired chain of the mechanism that distributes the gas not to become an end of inclination of the motor.
|
| 25. To withdraw a natyazhitel of a chain. |
| 26. To withdraw a hydraulic empurrador of a natyazhitel of a chain. |
| 27. To unscrew nuts and to discover the fixation of axles together with the oil pipeline of oil producing resources. The axles coverings are marked for the installation besides that repeated at the places. The absence of the marking, before the coverings removal they have to be marked. |
| 28. To take axles of a head of the cylinder block. In the distributive one to an end, operational final valves, there is an etiquette of the green color. The absence of an etiquette to mark axles. |
| 29. To withdraw empurradores hydraulic of valves and to put them in containeres correspondents with the oil of the installation besides that repeated at the places. |
30. Gradually and constantly to unscrew 13 pins of the fixation of a head of the cylinder block in the sequence, the return to the pressure.
Prevention
The reuse of pins of the fixation of a head of the cylinder block is not recommended.
|
| 31. To withdraw a head of the cylinder block and to establish it in two wooden grindstones to avoid the damage of valves. |
| 32. To withdraw the placing of a head of the cylinder block and the captures of direction. |
| 33. To unscrew 4 pins and to take the bomb of oil of the cylinder block. |
| 34. To withdraw the sensor of the pressure of oil and the sensor of the provision of an end of inclination. |
| 35. To unscrew pins and nuts of the fixation of a case of oil and to withdraw it. |
| 36. To turn the motor. |
| 37. To withdraw a tube of a maslozabornik and a maslootrazhatel. |
| 38. To withdraw a rear cape of an end of inclination with a fighter ring. |
| 39. To check the existence of the marking in coverings of radical loads and conrod of an inclination end. In case of his absence it is necessary to indicate loads through a punch of center or an indelible pencil. |
| 40. To unscrew pins of sticks, to withdraw his coverings, to take sticks are joined and to take pistons together with cylinders sticks. |
| 41. To unscrew pins of coverings of radical loads, to discover radical loads and to take insertions. |
| 42. To take an end of inclination of the cylinder block. |
| 43. To take the persistent half of the rings of the end of inclination. |
