| 1. After the installation of the motor in the car to check the level of oil and liquid that cools. |
| 2. To unscrew taken of spark and desconectar the system of the ignition. |
| 3. There turns the motor an author until the lamp of the pressure of emergence of oil goes out. |
| 4. To support in spark captures and to join the system of the ignition. |
| 5. To begin the motor and to check the tension of all the systems. The smoking of the motor is the normal phenomenon how there is an ardency out of the oil of the motor that climbed a detail in the meeting. |
| 6. Some time to blow of empurradores hydraulic of valves, before the stuffing full of his oil will be heard. |
| 7. There checks the installation of a corner an advancement of the ignition and the turns of wasting time. |
| 8. After several minutes of the operation of motor repeatedly to check levels of oil and liquid that cools. |
| 9. If the new pistons, the rings or the insertions of an end of inclination were installed in the motor, it is necessary to treat the motor like c new and to do a management in soon for substituting the oil of motor and the filter. |
