FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   -3.2. Motor of DOHC
      3.2.1. Technical characteristic
      +3.2.2. The repair that does not demand the removal of the motor
      -3.2.3. Removal and installation of the motor without transmission
         3.2.3.1. Removal of the motor
         3.2.3.2. Additional operations in removal of the motor in cars with AKP
         3.2.3.3. Additional operations in removal of the motor with the transmission
         3.2.3.4. Installation of the motor
         3.2.3.5. Desmontagem of the motor
         3.2.3.6. Cylinders
         3.2.3.7. Check and restoration of pistons and rings of piston
         3.2.3.8. Fingers of piston and sticks
         3.2.3.9. Inclination end
         3.2.3.10. Radical loads and conrod
         3.2.3.11. Pendulum
         3.2.3.12. Meeting of the motor
         3.2.3.13. Launch of the motor after capital repairs
      3.2.4. System of ventilation of a case
      +3.2.5. Lubrication system
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


3.2.3.11. Pendulum

GENERAL INFORMATION

To check a pendulum to existence of damages, a garland of pendulum – in the existence of use and damages.

If the garland strongly was worn away or in her be an absent tooth, the garland must be substituted. The old garland can be withdrawn, when passed done in the drink between two teeths, and soon lower a chisel.

The installation of a new garland of gear in a pendulum demands the heating of one garland to 204 °C. there is executed by the uniform heating of a pendulum a hand blowpipe until the heated surfaces do not acquire a shadow clear-yellow.

Prevention

Not to overheat a garland, otherwise his force properties are going to be lost.


The garland has a tendentious interior of teeths what has to be turned to an author. When is the garland heated somewhat, to establish it quickly at the place, if necessary it will explore and cool in the natural way.