FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   +5.7. WEBER 2V carburator of TLD
   -5.8. System of injection of fuel
      5.8.1. Turns agreement of wasting time and quality of mixture
      5.8.2. Removal and installation of the sensor of provision of a valve of butterfly
      5.8.3. Removal and installation of the valve of management of turns waste time
      5.8.4. Removal and installation of measuring instruments of a draft
      5.8.5. Removal and installation of mouths of fuel
      5.8.6. Removal and installation of the sensor of temperature of the road of fuel
      5.8.7. Removal and installation of the regulator of pressure of fuel
      5.8.8. Removal and installation of the case of a valve of butterfly in the motor DOHC
      5.8.9. Removal and installation of the sensor of oxygen (HEGO)
      5.8.10. Removal and installation from a coal adsorber
      5.8.11. Removal and installation of the valve eletromagnética of a coal adsorber
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.8.8. Removal and installation of the case of a valve of butterfly in the motor DOHC

ORDER OF REALIZATION
1. To withdraw a weight they connect of the accumulator.
2. To exempt the capture of the sensor of the provision of a valve of butterfly of the support of the triangular form of property and to withdraw the capture.
3. Desconectar a thread of a gas pedal and a thread of the control of speed of the block.
4. To weaken a collar and desconectar a hose of airintaking of the case of a valve of butterfly.
5. To unscrew four pins and to take the case of a valve of butterfly of a collector of entered together with the placing.
6. The installation is executed to the sequences, the return to the removal.