FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   -5.6. WEBER 2V carburator
      5.6.1. Turns agreement of wasting time and quality of mixture
      5.6.2. Removal and installation of the carburator
      5.6.3. Meeting and agreement of the carburator
      5.6.4. Agreement of a slit of the air door
      5.6.5. Agreement of a slit of an intermediary step
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.6. WEBER 2V carburator

GENERAL INFORMATION

Weber 2V carburator

Weber 2V carburator with a vertical current and the automatic door. Opening of consecutive valves of butterfly.

The carburators of Weber of two cameras are installed in OHC and driving DOHC.

In the carburator there are main dosage systems in the first and second camera, the system of wasting time of the first camera, the transitional systems of the first and second camera, the economizador of the ways of power, the bomb aceleradora, the automatic initial agreement and an electric heater of the soaked air.

The valve of butterfly of the second camera gives itself the vacuum created in the primary camera.

Heating of the only electric automatic air door. The vacuum the repayable device of a priotkryvaniye of the door is a total with the case.

The distinctive characteristic of the carburator is the motor of step operational situation a butterfly valve. This motor addresses for the module of the electronic control of the ignition of MK II (module ESC II) and maintain the stability of wasting time, and also there makes working the provision of a valve of butterfly in the turns reduction, begin and a stop of the motor. The best fuel consumption and SO low level is got like that.