FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   -5.6. WEBER 2V carburator
      5.6.1. Turns agreement of wasting time and quality of mixture
      5.6.2. Removal and installation of the carburator
      5.6.3. Meeting and agreement of the carburator
      5.6.4. Agreement of a slit of the air door
      5.6.5. Agreement of a slit of an intermediary step
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.6.5. Agreement of a slit of an intermediary step

GENERAL INFORMATION

Lavador of step of agreement of a slit of an intermediary step

1 - lavador of step,

2 - screw agreement

ORDER OF REALIZATION

1. To turn lightly the lever of the walk of a valve of butterfly and, making spinning a lavador of step, establishing it so that his superior edge concerned the screw of agreement.
2. To launch the lever of the walk of a valve of butterfly, therefore, there is a fixation of a lavador of step.
3. To measure for the tipsy nucleus (an end is possible of furadeira) a slit of the air door.
	4. In case of the discrepancy of a slit to the necessary value to turn in a uvula (it is specified by an arrow) in one or another party and to establish the necessary slit.
5. To establish the protective ring.
6. To establish a covering of the initial agreement.
7. To install the filter of air and to join a weight they connect to the accumulator.