FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   -5.6. WEBER 2V carburator
      5.6.1. Turns agreement of wasting time and quality of mixture
      5.6.2. Removal and installation of the carburator
      5.6.3. Meeting and agreement of the carburator
      5.6.4. Agreement of a slit of the air door
      5.6.5. Agreement of a slit of an intermediary step
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.6.3. Meeting and agreement of the carburator

GENERAL INFORMATION

Agreement of level of a buoy

1 - an edge in a buoy,

2 - the regulation ear,

X - buoy level

ORDER OF REALIZATION

1. The meeting is done in the sequence to the return desmontagem.
2. To join a covering of carburator, to check and if necessary the buoy level will adjust.
3. To check the agreement of a buoy so that it will establish the superior part of the carburator so that the needle valve was closed, but the ball of the valve must not be drowned. To measure the distance of putting on the superior part of the carburator to the bottom of a buoy. In the discrepancy of the demanded received size to turn in a persistent uvula in a buoy.
4. To establish the superior part of the carburator and other elements before retired.
5. To install the motor of step.
6. To adjust a slit of the air door.