FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   -5.6. WEBER 2V carburator
      5.6.1. Turns agreement of wasting time and quality of mixture
      5.6.2. Removal and installation of the carburator
      5.6.3. Meeting and agreement of the carburator
      5.6.4. Agreement of a slit of the air door
      5.6.5. Agreement of a slit of an intermediary step
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.6.4. Agreement of a slit of the air door

GENERAL INFORMATION

Agreement of a slit of the air door

1 - membrane stick,

2 - the elastic band that fixes the lever of flood

3 - flood lever,

4 - screwdriver

Measurement of a slit of the air door

1 - the tipsy nucleus or an end of a furadeira,

2 - screwdriver,

3 - lever of the walk of a valve of butterfly

Etiquettes of agreement of the initial agreement

The agreement of a slit of the air door has to be done after being demolished of the carburator or in case of the operation insuficientemente efficiently of the motor.

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator and the filter of air.

2. To put etiquettes, to unscrew 3 screws of the fixation of a flange, to withdraw a flange and a covering of the initial agreement.

3. To take the protective ring.

4. To install the lever of a valve of butterfly in the provision of the full opening.

5. To move the lever of flood of the initial agreement up to the close full of air doors and to launch the lever of the walk of valves of butterfly.

6. To fix an elastic band to flood lever in the superior situation.

7. The screwdriver to hold tight a stick of membrane against the stop.

8. To measure for the tipsy nucleus (an end is possible of furadeira) a slit of the air door.

9. In case of the discrepancy of a slit to the necessary value to withdraw a protective hat of the agreement they support and, when the agreement screw spinning the screwdriver, to establish the necessary slit.

10. To establish the protective ring.

11. To establish a covering with one spring bimetálica, having gone together at the same time you label of installation. For the agreement of the mixture it is possible to become a covering with one spring bimetálica in one or another party.