FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

5.8.7. Removal and installation of the regulator of pressure of fuel

GENERAL INFORMATION

Regulator of pressure of fuel

1 - inhale the tube of branch,

2 - superior case,

3 - spring,

4 - diaphragm,

5 - valve,

6 - lower case,

7 - flange,

8 - placing

ORDER OF REALIZATION

Motor of OHC and ^{V6 2,8 dm3}
1. To withdraw a weight they connect of the accumulator.
2. In motors V6 for desconectar wires of high voltage of a support of the triangular form of regulator of pressure of fuel.
	3. To install the corresponding container below the regulator of pressure of fuel and desconectar a tube of repayable fuel (it is specified by an arrow).
	4. Desconectar an electronic valve of the regulator (it is specified by an arrow).
5. To weaken a nut of the union of the provision of the fuel and to take away the pressure in the fuel system.
	6. To unscrew a nut (it is specified by an arrow) of the base of the regulator and to withdraw the regulator.
7. The installation is done in the sequence, the return to the removal.
Motor of DOHC
8. To withdraw a weight they connect of the accumulator.
9. To weaken slowly the connection of the provision of the fuel of the fuel builds a road distributive to take away the pressure in the fuel system.
	10. For desconectar a fuel they return the hose (it is specified by an arrow) of the regulator of pressure.
11. Desconectar an electronic valve of the superior part of the regulator.
12. To unscrew two pins of fixation and to take the regulator of the road of fuel together with a fighter ring.
13. To install a new ring of fighter in the regulator, previously when motor lubricated it.
14. The new installation is executed to the sequences, the return to the removal.
^{V6, 2,4 motors and 2,9 dm3}
15. To withdraw a weight they connect of the accumulator.
16. To weaken slowly the connection of the provision of the fuel of the fuel builds a road distributive to take away the pressure in the fuel system.
17. In motors with the aluminum fuel the distributive road and the regulator of the pressure of the fuel of the last model to withdraw the fuel of property return the collar of tube of the top of regulator.
	18. To install the corresponding container below the regulator of pressure of fuel and desconectar a hose of repayable fuel (it is specified by an arrow) and an electronic valve of the regulator of pressure of fuel.
19. To unscrew and to withdraw the regulator of the road of fuel.
20. The installation is done in the sequence, the return to the removal. To polish a ring of fighter with the silicon lubricant. To include ignition of 5 times, not including an author of motor to lift the pressure in the fuel system.