| Models up to July of 1990. |
| 1. The coal adsorber is installed in a driving compartment in the right fender near to the fixation of a torture of a support of the triangular form of interruption. |
| 2. To withdraw a weight they connect of the accumulator. |
| 3. To unscrew 2 screws of the fixation of a wide tank and to withdraw a tank from a coal adsorber. |
| 4. Desconecte a hose of vacuum of the top from a coal adsorber. |
| 5. To unscrew a pin of fixation, to take a coal adsorber of a driving compartment. |
| 6. The installation is done in the sequence, the return to the removal. |
| Models from July of 1990. |
|
7. The coal adsorber (it is specified by an arrow) rest behind right behind the wheel where it is installed in the lowest side of a hoof of the car. |
| 8. To lift a rear part of the car and to register in supports. |
| 9. To withdraw a weight they connect of the accumulator. |
| 10. Desconectar a hose of vacuum of the top from a coal adsorber and to unscrew the screw of fixation. |
| 11. To lift a coal adsorber, to unhook of a support of the triangular form of agreement and to take of the car. |
| 12. The installation is done in the sequence, the return to the removal. |
