| Motors of OHC and V6 2,8 dm3 |
| 1. To withdraw a weight they connect of the accumulator. |
| 2. In motors V6 to discover the connection of a regulator that fixes three screws. |
| 3. To withdraw the road that joins the instrument of measuring of current air to the entry oil pipeline. |
| 4. In motors ONS to discover the distributor and to put it to the part. If necessary wires of high voltage it will withdraw. |
| 5. To withdraw the capture of the valve of turns of wasting time, the sensor of the provision of a valve of butterfly and the sensor of the temperature of cooling the liquid. |
| 6. In motors V6 for desconectar a thread of regulator of a support of the triangular form of the regulator of the pressure of fuel. |
| 7. Desconectar slowly vacuum and tubes of fuel of the regulator of the pressure of fuel and the connection of the provision of the fuel of the road of fuel. |
| 8. To withdraw the camera of the excessive pressure and the case of a regulator. |
| 9. Desconectar wires of mouths of fuel. |
| 10. To unscrew an arm of fuel and to withdraw it together with fuel mouths. |
| 11. The hunting of rings and the clips of property in all the fuel mouths is subject to the substitution even if only a fuel mouth will have to be taken out of the road. The lowest fighter ring is established between lavadores thick and fine in the end of a mouth. |
| 12. The installation is done in the sequence, the return to the removal. Lubricant polishes rings of fighter with the silicon Ford-ESEM 1C171A. To check contents with. |
| Motors of DOHC |
| 13. To withdraw a weight they connect of the accumulator. |
| 14. For the improvement of the access to withdraw the capture of the sensor of the temperature of the air that arrives, the wires of the high voltage and a thread of a gas pedal or to move them to the part. |
| 15. To weaken slowly the connection of the provision of the fuel to the road of the removal of the pressure in the fuel system and desconectar a hose. |
|
16. To withdraw a hose of repayable fuel (it is specified by an arrow) of the road. |
| 17. To catch the vacuum they phone on the superior part of the regulator of the pressure. |
| 18. To withdraw taken of mouths of fuel and the sensor of the temperature. |
| 19. To unscrew two pins of the fixation and to withdraw the road of fuel. |
| 20. To take mouths of fuel of a head of the cylinder block. |
| 21. The hunting of rings and the clips of property in all the fuel mouths is subject to the substitution even if only a fuel mouth will have to be taken out of the road. The lowest fighter ring is established between lavadores thick and fine in the end of a mouth. |
| 22. The installation is done in the sequence, the return to the removal. Lubricant polishes rings of fighter with the silicon Ford-ESEM 1C171A. To check contents with. |
| V6, 2,4 motors and 2,9 dm3 |
| 23. To withdraw a weight they connect of the accumulator. |
| 24. To withdraw the road that joins the instrument of measuring of current air to the entry oil pipeline. |
| 25. Desconectar to lever of communication of the case of a regulator and to unscrew 2 pins of the fixation of a support of the triangular form of a thread of a regulator. |
| 26. Desconectar electronic valves, the valve of the ventilation of a case and the regulator of the pressure of the fuel of the case of regulator. |
| 27. Desconectar been overcome with the sensor of the provision of a valve of butterfly, the sensors of the temperature of the motor and cooling of liquid and the valve of the management of turns waste time. |
| 28. To unscrew 6 pins Togkh that fix the camera airintaking. |
| 29. To weaken slowly the connection of the provision of the fuel of the fuel builds a road distributive to take away the pressure in the fuel system. |
| 30. Desconectar a tube of the provision of the fuel of the road of fuel and a tube of the return of the fuel. |
| 31. To unscrew pins of the fixation of the road of fuel and to withdraw the road. |
| 32. To withdraw clips of fixation and to take mouths of fuel of the road. |
| 33. The hunting of rings and the clips of property in all the fuel mouths is subject to the substitution even if only a fuel mouth will have to be taken out of the road. The lowest fighter ring is established between lavadores thick and fine in the end of a mouth. |
| 34. The installation is done in the sequence, the return to the removal. To polish rings of fighter with the lubricating silicon of Ford - ESEM 1C171A. To check contents with. |
|
35. In motors with the regulator of the pressure of the fuel of the first launch if there is necessary to adhere a new tube of fuel of entry to the road. The new conector hands with a control over the fascinating ring and allows to maintain teeth of conector taken. When two halves of a conector are contracted together, the ring jumps for out what demonstrates that the connection happened with success. |
| 36. To include ignition of 5 times, not including an author of motor to lift the pressure in the fuel system. |
