| 1. To withdraw a weight they connect of the accumulator. |
|
2. To withdraw the taken one (2) sensors of the provision of a valve of butterfly (1). In motors ONS it is located below of the turns valve of wasting time, from a reverse side of the oil pipeline of entry. In DOHC and motors V6 one locates below a covering of a valve of butterfly. |
|
3. To unscrew the sensor of the provision of a valve of butterfly and to withdraw the sensor of an axle of a valve of butterfly (the pins of the fixation are specified by firearms). |
| 4. It is not recommended to make spinning the central part of the sensor against his normal rotation, it can damage the sensor. |
| 5. During the installation to combine a facet in an axle of a valve of butterfly with a facet in the center of the sensor. |
| 6. To install the sensor and to screw two pins. |
| 7. The capture adheres to the sensor. |
