FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   -5.7. WEBER 2V carburator of TLD
      5.7.1. Removal and installation of the carburator
      5.7.2. Turns agreement of wasting time and quality of mixture
      5.7.3. Valve of needle of the camera made work for the buoy
      5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera
      5.7.5. Substitution of a diaphragm of the valve of the economizador
      5.7.6. Automatic initial agreement
      5.7.7. Turns agreement of bystry to waste time
      5.7.8. Removal and installation of a damper of a valve of butterfly
      5.7.9. Adjust
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.7.7. Turns agreement of bystry to waste time

GENERAL INFORMATION

Turns agreement of bystry to waste time

1 - lavador of step of bystry to waste time,

2 - an agreement of the agreement supports in a middle step of a lavador of step

ORDER OF REALIZATION
1. To adjust turns of wasting time and quality of the mixture of fuel.
2. To heat the motor up to the work temperature and to withdraw the case of the filter of air.
3. To a lightly open one a butterfly valve, soon to close until the agreement screw does not install in the third (middle) step of a lavador of step of bystry to waste time and to launch a valve of butterfly.
4. To begin the motor, without touching the pedal of gas pedal and checking turns of motor.
5. If necessary motor turns it will adjust, becoming the screw of the agreement of turns of bystry to waste time. To hold tight and to launch a pedal of gas pedal. It is secured what the motor turns to turns they waste time.
6. To put the motor out, desconectar a tacômetro and to install the case of the filter of air.