FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   -5.7. WEBER 2V carburator of TLD
      5.7.1. Removal and installation of the carburator
      5.7.2. Turns agreement of wasting time and quality of mixture
      5.7.3. Valve of needle of the camera made work for the buoy
      5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera
      5.7.5. Substitution of a diaphragm of the valve of the economizador
      5.7.6. Automatic initial agreement
      5.7.7. Turns agreement of bystry to waste time
      5.7.8. Removal and installation of a damper of a valve of butterfly
      5.7.9. Adjust
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.7.5. Substitution of a diaphragm of the valve of the economizador

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator and the case of the filter of air.

2. To unscrew three screws of the fixation of a covering, to discover the valve of the economizador and to take one spring.

3. To withdraw a diaphragm of a flange of case.

4. The installation is done in the sequence, the return to the removal.

Prevention

The substitution of other diaphragms of the carburator is done in the same way.