FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   -5.7. WEBER 2V carburator of TLD
      5.7.1. Removal and installation of the carburator
      5.7.2. Turns agreement of wasting time and quality of mixture
      5.7.3. Valve of needle of the camera made work for the buoy
      5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera
      5.7.5. Substitution of a diaphragm of the valve of the economizador
      5.7.6. Automatic initial agreement
      5.7.7. Turns agreement of bystry to waste time
      5.7.8. Removal and installation of a damper of a valve of butterfly
      5.7.9. Adjust
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.7.3. Valve of needle of the camera made work for the buoy

GENERAL INFORMATION

Agreement of a buoy and the valve of needle in a carburator covering

1 - it floats,

2 - needle valve,

3 - unions of hoses of fuel

Agreement of a buoy

The operation of the valve of needle determines the level of fuel in the camera made work for the buoy.

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator and the case of the filter of air.

2. To withdraw wires of the automatic initial agreement.

3. To withdraw hoses of offer and return of the fuel of the carburator.

4. Desconectar wires of the case of beginning the automatic equipment.

5. Desconectar wires of the valve of closure of fuel.

6. To unscrew four screws of the fixation of the carburator to an entry collector.

7. To unscrew two screws of the fixation and to discover the carburator, leaving the main part of the carburator at the place in an entry collector.

8. To take an axle of a buoy and to withdraw a buoy.

9. To take the valve of needle.

10. To unscrew the case of the valve of needle.

11. Before the installation to check a condition of a conical surface of an edge of a needle.

12. To support in case of the valve of needle with the new copper placing.

13. To insert the valve of needle, a buoy and an axle of a buoy.

14. To check the agreement of a buoy so that it will establish the superior part of the carburator so that the needle valve was closed, but the ball of the valve must not be drowned. To measure the distance of putting on the superior part of the carburator to the bottom of a buoy. In the discrepancy of the demanded received size to turn in a persistent uvula in a buoy.

15. To establish the superior part of the carburator and other elements before retired. To check and, if necessarily, to adjust turns and quality of the mixture of wasting time.