FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   -5.7. WEBER 2V carburator of TLD
      5.7.1. Removal and installation of the carburator
      5.7.2. Turns agreement of wasting time and quality of mixture
      5.7.3. Valve of needle of the camera made work for the buoy
      5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera
      5.7.5. Substitution of a diaphragm of the valve of the economizador
      5.7.6. Automatic initial agreement
      5.7.7. Turns agreement of bystry to waste time
      5.7.8. Removal and installation of a damper of a valve of butterfly
      5.7.9. Adjust
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera

Substitution

ORDER OF REALIZATION
1. To withdraw a weight they connect of the accumulator and the case of the filter of air.
2. Desconectar to stick of operational diaphragm of a coulisse of a valve of butterfly, moving the lowest part of a stick I lower and when his end of a nest is resulting.
3. To unscrew four screws of the fixation of a covering, to discover and to take one spring.
4. To be careful takes a diaphragm and the operational stick of the case.
5. To compensate carefully for the inter-connected surfaces of the case of a diaphragm and a covering and to insert a diaphragm in the case, combining openings in a diaphragm with a vacuum cavity in the case.
6. To establish one spring and a covering, to combine openings and to fix a covering for screws.
7. The operational stick adheres to a coulisse of a valve of butterfly.
8. To install the filter of air.
9. To join a wire of the mass of the accumulator.