FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   +5.4. System of air provision
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   -5.7. WEBER 2V carburator of TLD
      5.7.1. Removal and installation of the carburator
      5.7.2. Turns agreement of wasting time and quality of mixture
      5.7.3. Valve of needle of the camera made work for the buoy
      5.7.4. Device of vacuum of the walk of a valve of butterfly of the secondary camera
      5.7.5. Substitution of a diaphragm of the valve of the economizador
      5.7.6. Automatic initial agreement
      5.7.7. Turns agreement of bystry to waste time
      5.7.8. Removal and installation of a damper of a valve of butterfly
      5.7.9. Adjust
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.7.6. Automatic initial agreement

GENERAL INFORMATION

Mechanism of carburator of TLD begins the automatic equipment of Weber 2V

1 - the top that works coulisse of the door,
2 - repayable spring of a came of bystry to waste time,
3 - taken,

4 - lever axle,
5 - coulisse,
6 - lever

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator and the case of the filter of air.

2. To discover the carburator.

3. To observe an agreement of adjusting etiquettes, unscrewing 3 screws of the fixation of a flange, withdrawing a flange and a covering of the initial agreement.

4. To take the protective ring.

5. To unscrew three screws of the case of the door, in view of this, possibly, a repayable spring of a came will be necessary desconectar of bystry what wastes time to acquire the access to one of screws; then desconectar the coulisse of the door of the operational lever and to withdraw the initial agreement.

6. To install the lever of a valve of butterfly in the provision of the full opening.

7. To move the lever of flood of the initial agreement up to the close full of air doors and to launch the lever of the walk of valves of butterfly.

8. To unscrew three screws of the fixation, to discover a diaphragm of vacuum and to take a diaphragm.

9. The meeting is done in the sequence, desmontagem of return.