FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   -3.2. Motor of DOHC
      3.2.1. Technical characteristic
      -3.2.2. The repair that does not demand the removal of the motor
         3.2.2.1. Chain of the mechanism that distributes the gas and asterisks
         -3.2.2.2. Head of the cylinder block
            3.2.2.2.1. Removal of a head of the cylinder block
            3.2.2.2.2. To be demolished and meeting of a head of the cylinder block
            3.2.2.2.3. Check of a head of the cylinder block
            3.2.2.2.4. Check of the captures of direction of valves
            3.2.2.2.5. Processing of saddles of valves in a head of the cylinder block
            3.2.2.2.6. Grinding in
            3.2.2.2.7. Meeting of a head of the cylinder block
            3.2.2.2.8. Installation of a head of the cylinder block
         3.2.2.3. Removal and installation of a ring of rear fighter of an end of inclination
      +3.2.3. Removal and installation of the motor without transmission
      3.2.4. System of ventilation of a case
      +3.2.5. Lubrication system
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.2.2.2.5. Processing of saddles of valves in a head of the cylinder block

GENERAL INFORMATION

The valves saddles with traces of use or a podgoraniye have to be prosecuted with compulsory preservation of corners and sizes of a facet. Otherwise it is necessary to do the substitution of a head of the cylinder block. After any processing of saddles of valves it is necessary to execute to grind in of valves.