FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   -3.2. Motor of DOHC
      3.2.1. Technical characteristic
      -3.2.2. The repair that does not demand the removal of the motor
         3.2.2.1. Chain of the mechanism that distributes the gas and asterisks
         -3.2.2.2. Head of the cylinder block
            3.2.2.2.1. Removal of a head of the cylinder block
            3.2.2.2.2. To be demolished and meeting of a head of the cylinder block
            3.2.2.2.3. Check of a head of the cylinder block
            3.2.2.2.4. Check of the captures of direction of valves
            3.2.2.2.5. Processing of saddles of valves in a head of the cylinder block
            3.2.2.2.6. Grinding in
            3.2.2.2.7. Meeting of a head of the cylinder block
            3.2.2.2.8. Installation of a head of the cylinder block
         3.2.2.3. Removal and installation of a ring of rear fighter of an end of inclination
      +3.2.3. Removal and installation of the motor without transmission
      3.2.4. System of ventilation of a case
      +3.2.5. Lubrication system
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.2.2.2.4. Check of the captures of direction of valves

ORDER OF REALIZATION

1. The captures of direction used valves do not supply the installation coaxial of valves in saddles that it takes to the significant increase in consumption of fuel and oil.

2. To check internal diameters of the valves of direction. If the values exceed the most admissible size, then it is necessary to substitute a guide of valves in the special repairs workshop.

Prevention

The substitution of a guide also demands the regrinding of a nest of the corresponding valve.

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE