FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   +3.1. Motor of OHC
   -3.2. Motor of DOHC
      3.2.1. Technical characteristic
      -3.2.2. The repair that does not demand the removal of the motor
         3.2.2.1. Chain of the mechanism that distributes the gas and asterisks
         +3.2.2.2. Head of the cylinder block
         3.2.2.3. Removal and installation of a ring of rear fighter of an end of inclination
      +3.2.3. Removal and installation of the motor without transmission
      3.2.4. System of ventilation of a case
      +3.2.5. Lubrication system
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


3.2.2.3. Removal and installation of a ring of rear fighter of an end of inclination

GENERAL INFORMATION

mandrel special of installation of a ring of rear fighter of an end of inclination

E - a rear cape,

In – the special instrument

ORDER OF REALIZATION
1. To withdraw the transmission.
2. To withdraw the union.
3. To remove a pendulum and a protective policeman of the motor.
4. For the extraction of a ring of rear fighter of an end of inclination to perforate two small openings in a ring, to twist in in them two screws they autocut and passatizham of leaders of the screws they autocut to spread a ring of fighter out.
5. To compensate for a nest of a ring of fighter.
6. To polish edges of work of a new hunting they sound with the oil of fresh motor and through a special mandrel, to establish it in a nest for work edges in the interior.
7. To establish a pendulum.