| 1. To arrange the motor in the corresponding bed. |
| 2. To fuse the oil of the trundle bed of oil, to unscrew a filter of oil and to take the rate of the level of oil. |
| 3. To withdraw the main part and a plate of pressure (to indicate the direction of his installation). |
| 4. To unscrew taken of spark and to remove the distributor of ignition, having indicated his situation of the simplification of the subsequent installation. |
| 5. Desconectar the vacuum oil pipeline. |
| 6. To withdraw a covering of a belt of gear and a pulley of the bomb of cooling the liquid. |
| 7. To discover a head of the cylinder block. |
| 8. To remove the creator and I embroider a belt of supporter's walk and a pulley of the bomb of cooling the liquid. |
| 9. To unscrew pins of the fixation and to withdraw a pulley of an end of inclination. |
| 10. To unscrew and to take a pin, a lavador and a pulley of an intermediary end. |
| 11. To weaken the device of tension of a belt of gear, to move it, surpassing the resistance of one spring and to register in the retired situation of a belt. |
| 12. To take away a belt of gear. |
13. To withdraw pulleys of an end of inclination (in case of the necessity through an artist of streaptise 21.028), an intermediary end and an axle.
Desconectar a line of supply of fuel of the carburator. |
| 14. To unscrew pins of the fixation of a head of the cylinder block as must be the return to his pressure (to see the rice. The order of the pressure of pins of the fixation of a head of the cylinder block) and to withdraw it together with entry and final collectors. |
| 15. To take two pins of the camera of the removal of cooling the liquid (of a head of the cylinder block), to withdraw a ring of agreement and to take the thermostat and placing. |
| 16. To withdraw the bomb of oil, an empurrador and lines of supply of fuel. |
| 17. To unscrew the sensor of the pressure of oil and through the screwdriver to take his colonist. |
| 18. To withdraw the trundle bed of oil. |
| 19. To withdraw an advanced covering of the cylinder block. |
| 20. To withdraw (after it unscrews of two pins) the basic load of an intermediary end. |
| 21. Through an artist of streaptise 22.036 to take of an opening in a rear part of an end of inclination the load of end of union. |
| 22. There installs pistons in stocking of the height of cylinders of a possibility of the removal (through a scraper) a deposit of the superior part of cylinders. |
| 23. To tilt the motor of the unloading of remaining of oil of the cylinder block. |
| 24. To withdraw the bomb of cooling the liquid. |
|
25. To withdraw the bomb of oil (adaptation 21.012), and also to take his end of power. |
| 26. To check the presence of designations of radical loads (in coverings and the cylinder block of the motor), and also loads designations conrod (in sticks and coverings). In case of his absence it is necessary to indicate loads through a punch of center or an indelible pencil. |
| 27. To unscrew pins of sticks, to withdraw his coverings, to take sticks are joined and to take pistons together with cylinders sticks. |
| 28. To withdraw a pendulum. |
| 29. To unscrew pins of coverings of radical loads, to discover radical loads and to take insertions. |
|
30. To take of the cylinder block an end of inclination and his rear hunting they touch through an artist of streaptise. |
| 31. To take the persistent half of the rings of the end of inclination of the middle radical load. |
