FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   -3.1. Motor of OHC
      3.1.1. Technical characteristic
      -3.1.2. Service and repair
         3.1.2.1. Agreement of the motor
         +3.1.2.2. The repair that does not demand the removal of the motor
         3.1.2.3. Removal and installation of the motor
         -3.1.2.4. Repair of the motor
            3.1.2.4.1. Desmontagem of the motor
            3.1.2.4.2. Identification of the parts they interact
            3.1.2.4.3. Meeting of the motor
            3.1.2.4.4. Pistons substitution
            3.1.2.4.5. Removal and installation of an intermediary end
            3.1.2.4.6. System of distribution of gas
            3.1.2.4.7. Launch of the motor after capital repairs
         3.1.2.5. Lubrication system
         3.1.2.6. System of ventilation of a case
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.1.2.4.7. Launch of the motor after capital repairs

ORDER OF REALIZATION

1. After the installation of the motor in the car to check the level of oil and liquid that cools.

2. To unscrew taken of spark and desconectar the system of the ignition.

3. There turns the motor an author until the lamp of the pressure of emergence of oil goes out.

4. To support in spark captures and to join the system of the ignition.

5. To begin the motor and to check the tension of all the systems. The smoking of the motor is the normal phenomenon how there is an ardency out of the oil of the motor that climbed a detail in the meeting.

6. There checks the installation of a corner an advancement of the ignition and the turns of wasting time.

7. After several minutes of the operation of motor repeatedly to check levels of oil and liquid that cools.

8. If the new pistons, the rings or the insertions of an end of inclination were installed in the motor, it is necessary to treat the motor as new and to do a management in soon for substituting the oil of motor and the filter.