FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+ 2. Maintenance
- 3. Motors
   -3.1. Motor of OHC
      3.1.1. Technical characteristic
      -3.1.2. Service and repair
         3.1.2.1. Agreement of the motor
         +3.1.2.2. The repair that does not demand the removal of the motor
         3.1.2.3. Removal and installation of the motor
         -3.1.2.4. Repair of the motor
            3.1.2.4.1. Desmontagem of the motor
            3.1.2.4.2. Identification of the parts they interact
            3.1.2.4.3. Meeting of the motor
            3.1.2.4.4. Pistons substitution
            3.1.2.4.5. Removal and installation of an intermediary end
            3.1.2.4.6. System of distribution of gas
            3.1.2.4.7. Launch of the motor after capital repairs
         3.1.2.5. Lubrication system
         3.1.2.6. System of ventilation of a case
   +3.2. Motor of DOHC
   +3.3. Motor of V6
   +3.4. Systems of ignition and management of motor
   +3.5. Diesel engines
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

3.1.2.4.5. Removal and installation of an intermediary end

GENERAL INFORMATION

Persistent plate of fixation of an intermediary end

Removal and installation of an intermediary end

.
1 - covering,

2 - placing,

3 - ring fighter,

4 - intermediary end,

5 - agreement of axial plate,

6 - capture load

Removal

ORDER OF REALIZATION

1. For desconectar they connect a weight of the accumulator.

2. To weaken pins of the fixation of the creator and there takes away the side a belt of his walk.

3. To withdraw a covering of a belt of gear.

4. To withdraw a pulley of an end of inclination and his persistent placing.

5. To install the piston of the 1st cylinder in VMT, to indicate the provision of a rotor of the distributor and to remove the distributor of ignition.

6. To unscrew a pin of the fixation of a pulley in the intermediary to an end.

7. To weaken the fixation of the device of tension and to take away a belt of gear.

8. To withdraw the bomb of fuel and an empurrador of the walk.

9. To unscrew a covering of an intermediary end, a plate of agreement and to withdraw an intermediary end.

10. To take a ring of fighter of a covering of an intermediary end.

Installation

ORDER OF REALIZATION

1. To establish a ring of fighter of an intermediary end in a covering.

2. To fix an intermediary end and a plate of agreement in the cylinder block. To check a play of axial side of an intermediary end (in case of the necessity of substituting a plate of agreement, selecting respectively his thickness).

3. Edges of oil of a hunting they concern and 21.009 establishes it in an intermediary end together with a covering with the help adaptation To.

4. To establish a pulley in an intermediary end.

5. To insert in an opening in the cylinder block an empurrador of the walk of the bomb of fuel and to fix the bomb.

6. To establish a pulley in the intermediary to an end so that the edges of the fortification of a pulley addressed towards the cylinder block.

7. To check if there correspond provisions of an end of inclination, an axle and the distributor of the ignition to the position of the piston of the 1st cylinder in VMT. To fix the distributor of the ignition and to check the fairness of his installation.

8. To establish a belt of gear and to adjust his tension.

9. To establish in the doubled one to an end the persistent placing, and soon to be concentrated in a pulley operated with crank to an end.

10. To establish a covering of a belt of gear.

11. To establish the side a belt of the walk of the creator and ventilator, to adjust his tension (the deflexão will do 10 mm in the environment between pulleys of an end of inclination and the creator).

12. To install the distributor of ignition, there adhere wires of the high voltage and a wire of the weight to the accumulator.