FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   -5.4. System of air provision
      5.4.1. Removal and installation of the filter of air
      5.4.2. Temperature regulator
      5.4.3. Fuel bomb
      5.4.4. The substitution of the fuel filters in motors with the system of the injection of the fuel
      5.4.5. Removal and installation of the tank of fuel
      5.4.6. Removal and installation of the sensor of measurement of level of fuel
      5.4.7. Removal and installation of the switch inercial of fuel provision
      5.4.8. Removal and installation of a pedal of a gas pedal
      5.4.9. Removal and installation of a thread of a gas pedal
      5.4.10. Separator to steam
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.4.7. Removal and installation of the switch inercial of fuel provision

GENERAL INFORMATION

The agreement of the switch inercial of the fuel pumps in the Property models

The switch inercial is shown by an arrow.

The switch inercial of the provision of the fuel for the provision of the fuel in the system in case of the accident. The offer calls in at the power of the bomb of fuel.

ORDER OF REALIZATION
1. To withdraw a weight they connect of the accumulator.
2. To open a door of haulage company of baggage, to withdraw a few articles of tapestry of a haulage company of baggage and desconectar the capture of the switch put near to the drummer of the lock of door (the drawing in left – first models, the drawing on the right wing – last models).
3. To unscrew two screws of the fixation and to withdraw the switch inercial of the provision of the fuel.
4. The installation is done in the sequence of the return to the removal.