Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
5.1. Technical characteristic
5.2. Fuel
5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
-5.4. System of air provision
5.4.1. Removal and installation of the filter of air
5.4.2. Temperature regulator
5.4.3. Fuel bomb
5.4.4. The substitution of the fuel filters in motors with the system of the injection of the fuel
5.4.5. Removal and installation of the tank of fuel
5.4.6. Removal and installation of the sensor of measurement of level of fuel
5.4.7. Removal and installation of the switch inercial of fuel provision
5.4.8. Removal and installation of a pedal of a gas pedal
5.4.9. Removal and installation of a thread of a gas pedal
5.4.10. Separator to steam
+5.5. Carburator of PIERBURG
+5.6. WEBER 2V carburator
+5.7. WEBER 2V carburator of TLD
+5.8. System of injection of fuel
5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment
|
MOTORS WITH THE CARBURATOR
The filter of air of motors OHC with the carburator
|
|
1 - I marry,
2 - covering,
3 - the filtration element,
4 - vacuum diaphragm,
5 - tube of branch of provision of cold air |
The filter of air of motors DOHC with the carburator
|
|
1 - I marry,
2 - the filtration element,
3 - covering,
4 - a tube of branch of provision of the heated air,
5 - tube of branch of provision of cold air |
| ORDER OF REALIZATION |
| 1. To unscrew screws of a covering of the filter of air. |
| 2. To withdraw spring clips and a covering of the filter of air. |
| 3. To take the filter of air. |
| 4. To rub the internal surface of the case of the filter of air. |
| 5. Desconectar to road of entry of cold air. |
| 6. Desconectar an electronic valve of a collector of entry and the road of the provision of hot air of a zabornik of a final collector. |
| 7. To unscrew screws of the fixation of the case of the filter of air to a covering of a head of the cylinder block. |
| 8. The installation is done in the sequence, the return to the removal. |
|
MOTORS OF DOHC WITH SYSTEM OF INJECTION OF FUEL
The filter of air of the motor DOHC with system of injection of fuel
|
|
1 - covering,
2 - I marry,
3 - the filtration element,
4 - I score of measuring of current air,
5 - branch tube |
| ORDER OF REALIZATION |
| 1. Desconectar the capture of the valve of the management of wasting time lights an advanced part of the camera of the excessive pressure. |
| 2. To withdraw a hose of intaking of an air entry tube. |
| 3. To unscrew a nut of the fixation and to catch the airintaking they phone of a support of triangular form in the advanced list of a driving compartment. |
| 4. To withdraw spring clips of the fixation of a covering of the filter of air, soon desconectar and to catch the telephone of airintaking, the camera of the excessive pressure and a covering of the filter of air like a meeting, having desconectado a hose of the ventilation of a case of a tube airintaking. |
| 5. To take the filter of air, having noticed how if it installed. |
| 6. To rub the internal surface of the case of the filter of air. |
| 7. The installation is done in the sequence, the return to the removal. |
|
MOTORS WITH SYSTEM OF INJECTION OF FUEL
The filter of air of the motor OHC with system of injection of fuel
|
|
1 - I marry,
2 - the filtration element,
3 - covering,
4 - I score of measuring of current air,
5 - branch tubes |
| ORDER OF REALIZATION |
| 1. To withdraw 4 spring clips of the fixation of a covering of the filter of air. |
| 2. To lift a covering and to move it to the part. For the removal full of a covering for desconectar the instrument of measuring or unscrewing a covering. |
| 3. To take the filter of air, having noticed how if it installed. |
| 4. To rub the internal surface of the case of the filter of air. |
| 5. To unscrew three nuts of the fixation below an arch of the left wheel, desconectar the case of the filter of air of a hose of airintaking and to withdraw it. |
| 6. The installation is done in the sequence, the return to the removal. |
|
|
|
