FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   -5.4. System of air provision
      5.4.1. Removal and installation of the filter of air
      5.4.2. Temperature regulator
      5.4.3. Fuel bomb
      5.4.4. The substitution of the fuel filters in motors with the system of the injection of the fuel
      5.4.5. Removal and installation of the tank of fuel
      5.4.6. Removal and installation of the sensor of measurement of level of fuel
      5.4.7. Removal and installation of the switch inercial of fuel provision
      5.4.8. Removal and installation of a pedal of a gas pedal
      5.4.9. Removal and installation of a thread of a gas pedal
      5.4.10. Separator to steam
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

5.4.6. Removal and installation of the sensor of measurement of level of fuel

GENERAL INFORMATION

Removal of the sensor of measurement of level of fuel

ORDER OF REALIZATION

1. To withdraw the tank of fuel.

2. To unscrew the sensor of the tank of fuel, using the instrument of special Ford (Ns 23-014) or two transversalmente screwdrivers.

3. To withdraw the sensor.

4. The installation is done in the sequence, the return to the removal.