FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
   -5.4. System of air provision
      5.4.1. Removal and installation of the filter of air
      5.4.2. Temperature regulator
      5.4.3. Fuel bomb
      5.4.4. The substitution of the fuel filters in motors with the system of the injection of the fuel
      5.4.5. Removal and installation of the tank of fuel
      5.4.6. Removal and installation of the sensor of measurement of level of fuel
      5.4.7. Removal and installation of the switch inercial of fuel provision
      5.4.8. Removal and installation of a pedal of a gas pedal
      5.4.9. Removal and installation of a thread of a gas pedal
      5.4.10. Separator to steam
   +5.5. Carburator of PIERBURG
   +5.6. WEBER 2V carburator
   +5.7. WEBER 2V carburator of TLD
   +5.8. System of injection of fuel
   5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


5.4.10. Separator to steam

GENERAL INFORMATION

Separator to fuel steam without pressure regulator

1 - hose of repayable fuel,

2 - the hose of fuel of offer,

3 - fuel provision in the carburator

Separator to fuel steam with pressure regulator

1 - the hose of fuel of offer,

2 - hose of repayable fuel,

3 - fuel provision in the carburator

The carburator models equip of a separator the steam established in the left advanced internal wing. In models dm3 1,8 the separator lights the regulator of pressure.

ORDER OF REALIZATION
1. To withdraw a weight they connect of the accumulator.
2. To hoses of three marks joined with a separator the steam. Desconectar hoses of a separator to steam.
3. To unscrew two screws of the fixation and to withdraw a separator to steam.
Prevention

The separator to steam is always filled of the fuel.


4. The installation is done in the sequence, the return to the removal.