FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+ 6. Union
- 7. Transmissions
   +7.1. Mechanical transmission of five speeds of type of N
   +7.2. Mechanical MT 75 transmission
   -7.3. Transmission A4LD automatic
      7.3.1. Technical characteristic
      -7.3.2. Service and repair
         7.3.2.1. Work description
         7.3.2.2. Check of level of oil in the transmission
         7.3.2.3. Check and washing of the hydrokinetic transmission
         7.3.2.4. Check of pressure of oil in operational time of the transmission
         7.3.2.5. Test of an overload of the hydrokinetic transfer of motor
         7.3.2.6. Agreement of a stares of a brake of advanced planetary transfer
         7.3.2.7. Removal and installation of the regulator of vacuum
         7.3.2.8. Hydraulic auxiliary rocket of reverse planetary gear
         7.3.2.9. Centrifugal regulator of pressure of oil
         7.3.2.10. Substitution of a ring of rear fighter
         7.3.2.11. Removal and installation of the mechanism of the choice of transfers
         7.3.2.12. Removal and installation of sketch of the choice of transfers
         -7.3.2.13. Agreement of a thread of the mechanism of Kick down
            7.3.2.13.1. Cars with the valve eletromagnética
         7.3.2.14. Removal and installation of the transmission
         7.3.2.15. Bad functioning of the automatic exchange
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

7.3.2.13.1. Cars with the valve eletromagnética

GENERAL INFORMATION

Elements of agreement of a thread of the mechanism of kick are lowered by me in cars with the valve eletromagnética

E - the valve eletromagnética,

In – the case,

With – the bearer,

D - pin fixation,

Е – spherical finger of connection of a thread

ORDER OF REALIZATION

1. To install the lever of the choice of transfers for any situation, to include the ignition (without beginning the motor), holding tight against the stop a pedal of a gas pedal and registering it in this situation.
	2. 5 of the commutation to turn in reverse sense to the movement of the pointers of the clock to the capacity the lever to the lowest transfer and 17.031 establishes in a thread a standard for an exception of retension of end.
3. 4 to weaken pins fastenings of an arm of the valve eletromagnética and to advance the valve eletromagnética to an easy tension of a thread of the commutation soon to hold tight pins.
4. If the agreement to happen correctly, the valve eletromagnética when the offer of the tension in him will pull a thread and, turning the lever that ties 5 in the direction of the movement of the pointers of the clock against the stop, to maintain it in this situation.
5. In case of a retension of thread of commutation the valve eletromagnética is not installed in the necessary position that leads to the return of the lever of the commutation to an initial position.
6. In case of an insufficient tension of a thread of exchanging the lever of the commutation install in the necessary position, nevertheless it is to overheat of the valve eletromagnética what leads to the return of the lever to an initial position.
7. In both cases it is necessary to do the repeated agreement.