FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+ 6. Union
- 7. Transmissions
   +7.1. Mechanical transmission of five speeds of type of N
   +7.2. Mechanical MT 75 transmission
   -7.3. Transmission A4LD automatic
      7.3.1. Technical characteristic
      -7.3.2. Service and repair
         7.3.2.1. Work description
         7.3.2.2. Check of level of oil in the transmission
         7.3.2.3. Check and washing of the hydrokinetic transmission
         7.3.2.4. Check of pressure of oil in operational time of the transmission
         7.3.2.5. Test of an overload of the hydrokinetic transfer of motor
         7.3.2.6. Agreement of a stares of a brake of advanced planetary transfer
         7.3.2.7. Removal and installation of the regulator of vacuum
         7.3.2.8. Hydraulic auxiliary rocket of reverse planetary gear
         7.3.2.9. Centrifugal regulator of pressure of oil
         7.3.2.10. Substitution of a ring of rear fighter
         7.3.2.11. Removal and installation of the mechanism of the choice of transfers
         7.3.2.12. Removal and installation of sketch of the choice of transfers
         +7.3.2.13. Agreement of a thread of the mechanism of Kick down
         7.3.2.14. Removal and installation of the transmission
         7.3.2.15. Bad functioning of the automatic exchange
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


7.3.2.6. Agreement of a stares of a brake of advanced planetary transfer

GENERAL INFORMATION

Agreement of a stares of a brake of advanced planetary transfer

1 - pins agreement,

2 - countersows,

3 - lever of a reduction of transfers

ORDER OF REALIZATION
1. To unhook a thread of the lever (of V) of a reduction of transfers.
2. To weaken nuts (B) of the blockade of adjusting pins (A) and unscrewing these pins in several turns.
3. Through a dynamometer key 17.005 to hold tight a pin of agreement to a rassoyedineniye of the union of a key. The absence of a few 17.005-key to hold tight pins the moment of 13 nanômetros.
4. To unscrew a pin of agreement in two turns and to blockade it in this situation through a nut.
5. A thread adheres to the lever of a reduction of transfers.