FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+ 6. Union
- 7. Transmissions
   +7.1. Mechanical transmission of five speeds of type of N
   +7.2. Mechanical MT 75 transmission
   -7.3. Transmission A4LD automatic
      7.3.1. Technical characteristic
      -7.3.2. Service and repair
         7.3.2.1. Work description
         7.3.2.2. Check of level of oil in the transmission
         7.3.2.3. Check and washing of the hydrokinetic transmission
         7.3.2.4. Check of pressure of oil in operational time of the transmission
         7.3.2.5. Test of an overload of the hydrokinetic transfer of motor
         7.3.2.6. Agreement of a stares of a brake of advanced planetary transfer
         7.3.2.7. Removal and installation of the regulator of vacuum
         7.3.2.8. Hydraulic auxiliary rocket of reverse planetary gear
         7.3.2.9. Centrifugal regulator of pressure of oil
         7.3.2.10. Substitution of a ring of rear fighter
         7.3.2.11. Removal and installation of the mechanism of the choice of transfers
         7.3.2.12. Removal and installation of sketch of the choice of transfers
         +7.3.2.13. Agreement of a thread of the mechanism of Kick down
         7.3.2.14. Removal and installation of the transmission
         7.3.2.15. Bad functioning of the automatic exchange
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

7.3.2.15. Bad functioning of the automatic exchange

GENERAL INFORMATION

SIGNS	METHOD OF ELIMINATION
The lever of the dislocation of gear moves only or is blockaded	To check the lever of dislocation of gear.
	To check the mechanism of the dislocation of gear and the sheep of the lever of the dislocation of gear.
	To check the alternation of the safe management of the automatic exchange.
	To check a plate of identification of the transfer (in a case).
Begin when oils are flowing in the height of the hydrokinetic transfer after the substitution of a ring of fighter, and also the transfer bomb	To check the fairness of the installation of a ring in a case of the hydrokinetic transfer.
	To check: – condition of rear consolidation of an end of inclination of the motor, and also fighter of ring of the bomb of oil – the pressure of pins from aluminum of the hydrokinetic transfer, drain the cork of a case of the hydrokinetic transfer, and also the welded sewing of the hydrokinetic transfer.
The aspects of effluence of oil of the transmission are visible on the outside	To check: – fighter of ring of a rear part of a case of the transmission – horizontal an oil oil pipeline in a case and his connections – agreement of pin of the walk of advanced planetary transfer – placing of the lever of dislocation of gear, and also lever of a reduction of transfers – placing between a rear part of a case and connections of control – placing of the trundle bed of oil – placing of a thread of the walk of a speedometer – placing of the regulator of vacuum.
Oil effluence without extern aspects	To substitute the regulator of vacuum.