| 1. To withdraw the carburator of the motor. |
| 2. To compensate carefully for the carburator on the outside. |
|
3. To unscrew five screws (in the last models – four) fastenings of a covering of the carburator (1 – screws of the fixation of the carburator, 2 – screws of the fixation of a covering). |
| 4. To discover the carburator when what has swift attention to the connection of a came of bystry to waste time and the lever of a regulator. |
| 5. To withdraw the fuel remains of the camera made work for the buoy. |
| 6. If necessary the main jets and a jet will unscrew of wasting time. |
| 7. If the buoy or the valve of needle are withdrawn, they cannot be re-used, and it is necessary to establish new details. |
| 8. To unscrew a tube of the provision of the fuel with the filter. |
| 9. To unscrew three screws of the fixation of a support of the triangular form of a damper of a valve of butterfly of the first camera. Not to withdraw a damper of a valve of butterfly of the first camera of a support of triangular form if his substitution is not needed. |
| 10. To unscrew two screws of the fixation and, having pulled out the hinge of ball, to withdraw the knot of vacuum. |
| 11. To unscrew three screws of the fixation of a covering of the bomb. |
| 12. To discover, a diaphragm, one spring, a lavador and a lock. To observe the direction of a lock. |
| 13. To unscrew two screws of the fixation and to withdraw эконостат. |
| 14. To withdraw the fuel remains of the camera made work for the buoy. |
| 15. If necessary the main jets and a jet will unscrew of wasting time. |
| 16. If the buoy or the valve of needle are withdrawn, they cannot be re-used, and it is necessary to establish new details. |
| 17. To unscrew a tube of the provision of the fuel with the filter. |
| 18. To unscrew three screws of the fixation of a support of the triangular form of a damper of a valve of butterfly of the first camera. Not to withdraw a damper of a valve of butterfly of the first camera of a support of triangular form if his substitution is not needed. |
| 19. To unscrew two screws of the fixation and, having pulled out the hinge of ball, to withdraw the knot of vacuum. |
| 20. To unscrew three screws of the fixation of a covering of the bomb. |
| 21. To discover, a diaphragm, one spring, a lavador and a lock. To observe the direction of a lock. |
| 22. To unscrew two screws of the fixation and to withdraw эконостат. |
| 23. Carefully small screwdriver to launch clips from nylon and to classify эконостат. |
| 24. To unscrew the central pin of the fixation of the camera to cool the liquid and to withdraw the camera. Below a head of a pin and in the perimeter the cameras mount consolidations you cancel. |
| 25. In case of one spring bimetálica and the bearer of the lever of the door there there are etiquettes. They have the absence of etiquettes of putting itself. To unscrew three screws maintaining a clip to cancel and to withdraw a clip and the case. |
| 26. The bearer of the lever of the door can retire of the case of carburator as with the case bimetálico and the camera to cool the liquid, and without them, after unscrewing of screws of the fixation. |
| 27. The device of vacuum of the walk of the door of the secondary camera can be withdrawn after the removal of the bearer of the lever of the door moving from his emphasis of roll and an otzhatiya of a clip in the form of star. |
