Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+ 4. System cooling
- 5. Fuel system
5.1. Technical characteristic
5.2. Fuel
5.3. Gasoline without lead of V6, 2,4 motors and 2,9 dm3
+5.4. System of air provision
-5.5. Carburator of PIERBURG
5.5.1. Turns agreement of wasting time and quality of mixture
5.5.2. Agreement of a damper of a valve of butterfly of the first camera
5.5.3. Agreement of an initial slit of the air door
5.5.4. Removal and installation of the carburator
5.5.5. Desmontagem of the carburator
5.5.6. Meeting of the carburator
5.5.7. Adjust of bystry to waste time
5.5.8. Modifications of Pierburg 2V carburator from September of 1986
+5.6. WEBER 2V carburator
+5.7. WEBER 2V carburator of TLD
+5.8. System of injection of fuel
5.9. Removal and installation of a collector of entry
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment
|
Damper of a valve of butterfly of the first camera
|
|
1 - lever driving,
2 - damper countersow,
3 - damper diver,
4 - probe edge |
| ORDER OF REALIZATION |
| 1. To heat the motor up to the work temperature. |
| 2. To put the motor out. |
| 3. To weaken a nut in a damper of a valve of butterfly of the first camera and to adjust the provision of a damper so that the movable diver concerned the lever, without moving at the same time a diaphragm of damper. |
| 4. A nut to insist on a damper of a valve of butterfly of the first camera and to check the agreement. |
|
|
|
