FORD'S SCORPIO
1985-1994 of launch
Repair and operation of the car
Ford Skorpio
+
1.1. Identification of the car
-
2. Maintenance
2.1. Frequency of service of cars
2.2. Each one 10.000 km or once in a year
2.3. Each one 40.000 km
2.4. Each one 60.000 km or during 2 years
2.5. Check of level of oil of motor
2.6. Substitution of oil of motor and filter
2.7. Places of possible hole of oil of motor and his definition
2.8. The check of the level and substitution of cooling the liquid
2.9. Check of tension of the system of cooling
2.10. Taken of spark
2.11. Substitution of the filter of air
2.12. Substitution of the filter of fuel
2.13. Substitution of the valve of ventilation of a case of the motor
2.14. Liquid check in the system of air conditioning
2.15. Check of level of oil in the transmission
2.16. Check of level of oil in the rear bridge
2.17. Check of a condition of a protective covering of an end of power
2.18. The agreement of a brake carves in the automatic exchange
2.19. Check of a condition of halls and rear shoes of brake
2.20. Check of level and substitution of fluid of brake
2.21. Check of a condition of a support of the triangular form of interruption
2.22. Check of level of liquid in system of the amplifier of direction
2.23. The cleaning of a drain of the condensed one that is formed during the operation of the condicionador
2.24. Recommendations on motor oils
2.25. Specifications
+3. Motors
+4.
System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment
2.23. The cleaning of a drain of the condensed one that is formed during the operation of the condicionador
GENERAL INFORMATION
The plumbing of the removal of the moisture of condensation that is formed during the operation of the condicionador is in a driving compartment.
ORDER OF REALIZATION
1. To squeeze
out of tubes of branch of drain of the valve (they are specified by firearms) and to wash them out in the clean water.
2. To check the operation of the door of the valve that has to move easily and freely.
