FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+ 1.1. Identification of the car
- 2. Maintenance
   2.1. Frequency of service of cars
   2.2. Each one 10.000 km or once in a year
   2.3. Each one 40.000 km
   2.4. Each one 60.000 km or during 2 years
   2.5. Check of level of oil of motor
   2.6. Substitution of oil of motor and filter
   2.7. Places of possible hole of oil of motor and his definition
   2.8. The check of the level and substitution of cooling the liquid
   2.9. Check of tension of the system of cooling
   2.10. Taken of spark
   2.11. Substitution of the filter of air
   2.12. Substitution of the filter of fuel
   2.13. Substitution of the valve of ventilation of a case of the motor
   2.14. Liquid check in the system of air conditioning
   2.15. Check of level of oil in the transmission
   2.16. Check of level of oil in the rear bridge
   2.17. Check of a condition of a protective covering of an end of power
   2.18. The agreement of a brake carves in the automatic exchange
   2.19. Check of a condition of halls and rear shoes of brake
   2.20. Check of level and substitution of fluid of brake
   2.21. Check of a condition of a support of the triangular form of interruption
   2.22. Check of level of liquid in system of the amplifier of direction
   2.23. The cleaning of a drain of the condensed one that is formed during the operation of the condicionador
   2.24. Recommendations on motor oils
   2.25. Specifications
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

2.12. Substitution of the filter of fuel

THE MOTOR WITH SYSTEM OF INJECTION OF FUEL

ORDER OF REALIZATION

1. To withdraw the negative capture of the accumulator.
2. Below wheels advanced to enclose wedges and to lift a rear part of the car.
3. Below the fuel they filter to install the corresponding container.
4. For the removal of the pressure in the fuel system slowly to weaken the union of connection of an entry or production they water with hose to the filter. After the removal of the pressure in the system to unscrew completely hoses of fuel of the filter.
	5. The filter to unscrew a pin of fixation (it is specified by an arrow) and to take the filter of fuel.

DIESEL ENGINE

Water removal of the filter of fuel

ORDER OF REALIZATION

Prevention In the moment of the blow of the fuel diesel in hoses is necessary to rub them immediately.
1. To install below a cork of the water unloading of the fuel they filter the corresponding container.
	2. To weaken a cork of unloading (it is specified by an arrow) and to fuse approximately 100 dm3 of the mixture of the fuel with the water and after the emergence of the pure fuel, to crush a cork.
3. In case of what does not the fuel follow after confiding of a cork of the unloading, to unscrew a cork in the oil pipeline of distant seizure.

Substitution of the filter of fuel

ORDER OF REALIZATION

1. To install the corresponding container below the fuel filter.

2. To unscrew the fuel of getting a beating and supply waters with hose of the bearer of the filter and to deaden them traffic traffic jams.

3. To unscrew the filter of fuel.

4. To substitute the filter of fuel and to be filled completely of the fuel.

5. To substitute rings of fighter and to screw the filter of fuel.

6. To withdraw the air of the system of fuel.

Removal of air of system of fuel

ORDER OF REALIZATION

1. To install the corresponding container below the fuel filter.

2. To unscrew a cork of the removal of air in the oil pipeline of distant seizure.

3. To unscrew the hat that closes the doorknob of the manual bomb and to do the extraction through bomb for the bomb even from bass of a cork of the removal of air the fuel that does not contain bottles of air does not begin to go out.

4. In the violence way the manual bomb to crush a cork of the removal of air.

5. To begin the motor and to heat it.

6. In case of what is not the motor begun, to weaken the fixation of oil pipelines of the high pressure of the first and second cylinders and in order that an author turns the motor before the emergence of the first flashes of lightning in cylinders soon to hold tight oil pipelines the moment of 20 nanômetros.