FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+ 1.1. Identification of the car
- 2. Maintenance
   2.1. Frequency of service of cars
   2.2. Each one 10.000 km or once in a year
   2.3. Each one 40.000 km
   2.4. Each one 60.000 km or during 2 years
   2.5. Check of level of oil of motor
   2.6. Substitution of oil of motor and filter
   2.7. Places of possible hole of oil of motor and his definition
   2.8. The check of the level and substitution of cooling the liquid
   2.9. Check of tension of the system of cooling
   2.10. Taken of spark
   2.11. Substitution of the filter of air
   2.12. Substitution of the filter of fuel
   2.13. Substitution of the valve of ventilation of a case of the motor
   2.14. Liquid check in the system of air conditioning
   2.15. Check of level of oil in the transmission
   2.16. Check of level of oil in the rear bridge
   2.17. Check of a condition of a protective covering of an end of power
   2.18. The agreement of a brake carves in the automatic exchange
   2.19. Check of a condition of halls and rear shoes of brake
   2.20. Check of level and substitution of fluid of brake
   2.21. Check of a condition of a support of the triangular form of interruption
   2.22. Check of level of liquid in system of the amplifier of direction
   2.23. The cleaning of a drain of the condensed one that is formed during the operation of the condicionador
   2.24. Recommendations on motor oils
   2.25. Specifications
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

2.10. Taken of spark

GENERAL INFORMATION

Slit of interelectrode of a capture of spark

Check a standard of a slit of interelectrode of a capture of spark

Before the removal of the spark covers to withdraw the dirt, using a pure brush, the hoover or compressed air that prevents the blow of the dirt in motor cylinders.

ORDER OF REALIZATION

1. To withdraw hints of the high voltage connects of spark captures, and it is necessary to withdraw for a tip, but not for a wire.
2. To unscrew taken of spark.
3. The check of captures of spark shows a condition of the motor. The nasal part of the center of isolation of a spark to cover pure and white, shows that they are mixed there are in use the too poor or "hot" spark captures.
4. If the tip and a nasal part of the center of isolation are covered of a firm black raid, it shows which too rich mixture. If black and oil probably that the motor is used.
5. If the nasal part of the center of isolation is covered of an easy clear-brown raid, then one mixes that it is the best, and is probable that the motor in good form.
	6. The probe to check a slit of interelectrode of a capture of spark.
7. The slit of interelectrode of a capture of spark is important as in the too big or too small slit, the size of a spark of ignition and efficiency will be insufficient for the normal operation of the motor.
8. For the installation of a slit of interelectrode to turn in an extern electrode before receiving the necessary slit. Not to be bent in the whole central electrode as can break the insulator.
9. To rub carefully a part of woodcarving of a candle and to polish with the structure antiprigarny.
10. A hand to support in a spark capture, having excluded his twist and to hold tight the necessary moment. Moments of pressure of captures of spark: – the motor OHC – 25 nanômetros; – the motor DOHC – 20 nanômetros; – Nanômetro V6 2,9 - 40 motor; – Nanômetro V6 2,4 - 30 motor.
11. To establish hints of the high voltage connects in candles and to check the confidence of his installation.