FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car


Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+ 10. Supports of the triangular form of interruption
- 11. Brakes system
   11.1. Technical characteristic
   +11.2. Dispatch brakes
   +11.3. Subsequent brakes
   11.4. Agreement of the brake of emergence
   11.5. Removal of air of the system of brakes
   -11.6. System antiblockade
      11.6.1. Check that works
      11.6.2. Removal and installation of hydraulic knot of management
      11.6.3. Removal and installation of a pedal of brake
      11.6.4. Removal and installation of the accumulator of hydraulic knot
      11.6.5. Removal and installation of the bomb and motor of hydraulic knot
      11.6.6. Substitution of the sensor of speed of rotation of an advanced wheel
      11.6.7. Substitution of the sensor of speed of rotation of a rear wheel
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


11.6.6. Substitution of the sensor of speed of rotation of an advanced wheel

 Removal

ORDER OF REALIZATION
1. To weaken nuts of the fixation of the corresponding advanced wheel.
2. To lift the car and to withdraw a wheel.
3. To unscrew pins of the fixation of the sensor of the rotation.
4. Desconectar to electric capture of the sensor of rotation.
5. To take the sensor (it is specified by an arrow).
6. To unhook a sensor they connect of supports of triangular spring form.

Installation

ORDER OF REALIZATION
1. To compensate for a nest to fixation of the sensor of the speed of the rotation of a wheel of the dirt, rust aspects, etc.
2. To polish lightly a nest of the fixation of the sensor with the loads lubricant.
3. To install a new ring of fighter of the round section in the sensor.
4. To install the sensor of speed of rotation in his nest.
5. To hold tight a pin of the fixation of the sensor.
6. The electric capture to adhere to the sensor and to hook up to an electric wire in supports of triangular spring form.
7. To establish a wheel and to lower the car.
8. To hold tight nuts of the fixation of a wheel the corresponding moment.