FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+ 10. Supports of the triangular form of interruption
- 11. Brakes system
   11.1. Technical characteristic
   -11.2. Dispatch brakes
      11.2.1. Substitution of shoes of brake
      11.2.2. Substitution of a support
      11.2.3. Substitution of a disc of brake
   +11.3. Subsequent brakes
   11.4. Agreement of the brake of emergence
   11.5. Removal of air of the system of brakes
   +11.6. System antiblockade
+12. Wheels and tires
+13. Body
+14. Electric equipment

11.2. Dispatch brakes

11.2.1. Substitution of shoes of brake

GENERAL INFORMATION

Dispatch brake

1 - support arm,

2 - support,

3 - brake shoes,

4 - piston,

5 - brake disc,

6 - support of triangular form

Prevention

The simultaneous substitution of all the shoes of brake of advanced brakes is recommended if at least one of them is worn away to the least thickness.

ORDER OF REALIZATION

1. To weaken nuts of the fixation of advanced wheels.
2. To stand up and to register in front of the car, to withdraw advanced wheels.
	3. To catch carefully the screwdriver and there take a support of triangular form (it is specified by an arrow) the fastenings of a support of a brake.
	4. Through a key of 7 mm internal hexagons to unscrew two fingers of direction (firearm) of a support.
5. Desconectar been overcome with wires of the sensor of the use of shoes of brake.
6. Desconectar a support of the bearer and to lift it to a body through a wire (without unscrewing of the connection of hoses of brake).
7. To take of a support a shoe of internal brake and a shoe of extern brake of the blocks of direction.
8. The piston insists carefully on a support through the nucleus from corresponding wood, damage that looks for not an elastic covering of the piston. In case of the necessity a little of brake fluid it can withdraw of a tank previously.
9. To check a condition of a disc of brake and an elastic covering of the piston.

10. To establish a shoe of internal brake (the firearm in the left) in a support and an internal block presses the piston one spring (the firearm on the right).
11. To establish a shoe of extern brake in a support guide.
12. To establish a support in a guide and to crush two fingers of support of direction, holding tight his moment 20 nanômetros.
13. To establish a support of the triangular form of the fixation of a support of a brake at the appropriate place.
14. Of the same way substitutes shoes of brake in the second advanced brake.
15. To establish wheels, to lower the car and to hold tight nuts of the fixation of wheels.
16. It is several times strong to hold tight a pedal of brake to bring in shoes of brake of contact with a brake disc.
17. In case of the necessity of adding the amount of fluid of brake in a tank.